◆ 輸入端 Input side:

→ 2×接線柱端子 / 螺釘M4 4×Pillar teminal Φ=3mm / Screw M4

◆ 輸出端 Output side:

→ 2×插片端子 Plug-in terminals 6.3×0.8mm

◆ 電容端子 Terminals for Suppression capacitor:

→ 2×插片端子 Plug-in terminals 2.8×0.8mm

→ 機械耐久壽命 Mechanical life endurance	≥1E5
→ 電氣耐久壽命 Electrical life endurance	≥5E4
→ 最大沖擊電流 Max. Inrush current at 250V	90A
→ 最大沖擊電流 Max. Inrush current at 127V	132A
→ 接觸電阻 Contact resistance	≤30m Ohm
→ 絕緣電阻 Insulation resistance	≥7M Ohm
→ 基本介電強度 Dielectric strength of function	1500V
→ 加強介電強度 Dielectric strength of reinforced	3000V
→ 環境溫度 Ambient temperature	0℃~55℃
→ 阻燃等級 Flammability	UL 94V-0
→ 防護等級 Protection type	IP40
→ 適用于II類防護器具 Suitable for appliances of protection class II

◆ 可選帶以下鎖定類型： Optional with Following lock types:

→ 無鎖 No Lock

→ 閉合鎖定 Lock-on

→ 斷開鎖定 Lock-off

→ 斷開鎖定帶閉合鎖定 Lock-off with Lock-on

◆ 可選帶以下附件： Optional with the accessor as follows:

→ 濾波電容（電容值由客戶選定，一般為0.22uF或0.33uF） Suppression capacitor (commonly 0.22 or 0.33μF)

◆ TS13 系列是一款專用性的大電流扳機開關，集成防塵功能，內部為快速動作結構，廣泛應用于各類的電動工具，如：型材切割機，斜切鋸（介鋁機），125和150角向磨光機，電錘，電鎬等。有超過10種主體和扳機可供選擇，也可按召客戶要求定制。

◆ TS13 series are special type high rated trigger switch, integrated dustproof, withsnap-action structure, for used in high rated power-tools such as: Cut-off Machines, Miter Saws, 180mm and 230mm Angle Grinders, Rotary Hammers, Demolition Hammers, etc. These switch has more than 10 body and trigger types for customer's choice, also accept customize according to customer's request.